How to Make a Wooden Rocket Stove: Tips and Tricks

How to Make a Wooden Rocket Stove

Camping newbies, there is one thing that you need to learn – how to make a wooden rocket stove!

With a handy wooden rocket stove, cooking will be less stressful. Best of all, it can be useful beyond cooking. When it becomes too cold, this can also be a source of heat to keep you warm, making it a more compact alternative to a traditional bonfire.

Sure, you can opt to bring a portable camping stove. That would be easier, right? However, for those who are looking for a more authentic experience, you can never go wrong with a DIY stove. The process can be quite intimidating, but with the right knowledge, it will be a lot easier.

Want to learn how to make a wooden rocket stove? Read on and we’ll let you know how you can do it like a pro!

What is a Wooden Rocket Stove?

A rocket stove is an efficient combustion stove that uses a variety of materials to burn fire. While it is traditionally made of metal, if you want to treat it as an easy DIY project, you can also use a slab of wood.

With a wooden rocket stove, there is a feeding tube where you will insert the materials that will fuel the fire. It also has an air intake. This will allow air to circulate to keep the fire burning. Another important part is the chimney, which is where the flame will exit.

Compared to a traditional camping stove, one of the best benefits of a wooden rocket stove is that it is more efficient. It burns cleaner and it can also generate a large amount of heat while keeping the smoke that it produces at a minimum.

What You Will Need to Follow this Tutorial

The first thing you need to do is to gather the necessary material. Luckily, you don’t need a lot to complete this DIY project.

  • Wood slap
  • Auger bit
  • Round branch
  • Knife
  • Twigs
  • Lighter
  • Stones

A Step-by-Step Guide on How to Make a Wooden Rocket Stove

Now that you have the required materials, here are the easy steps to follow.

1. Find a Wood Slab

To start, you need to find a wood that you will use as the foundation of the stove. This is one of the most important steps as this will have an impact on the overall quality of the finished product.

The right size of the slab is a crucial consideration. At the very least, choose a slab that is one foot in diameter and is also one foot in length. Aside from the size, it should also be dead and dry. This will make it easy to drill and will also improve its ability to generate heat. Otherwise, you will exert more effort in drilling and you will produce a small fire.

2. Drill the Top Part of the Wood

Now that the slab is ready, the next step is to drill a hole on the top surface of the wood. This is where the fire will come out and will also serve as the chimney or exhaust.

Find a dead branch that is at least an inch in diameter. Insert a T-handle and push it to the middle of the branch. Slide an auger bit to the T-handle. You will now have a make-shift drill.

Drill a hole at the middle part of the log’s top surface. This is a manual task, so expect that it will require considerable effort on your end. Stop when you reach the middle part of the wood or when you reach at least six inches.

3. Drill the Side of the Wood

After drilling the top part of the wood, now is the time that you drill on the side. The horizontal hole should meet the vertical hole so that you will generate a flame on the top hole. Again, this needs to be done manually by forcing the auger bit into the wood while rotating the branch with the T-handle.

4. Test the Holes

With the two holes drilled, now is the time that you put them into a test. To do this, use a flashlight and place it on the top hole. Once it is on, you must see the light appearing on the side. Otherwise, this means that there is not a point where the two holes meet, and hence, you won’t be able to build a fire. Drill and adjust as needed.

5. Start a Fire

You are now ready to build a fire out of the wood slab. Use a knife to carve the edges of the hole on the side. This will improve air flow, and in turn, this will increase the heat. If the hole is too small, air circulation will also be limited.

6. Place Stones at the Top

Gather stones or rocks that are the same sizes and position them at the top of the wood slab. This will create a cooking surface. If there are no stones, this means that the pots and pans will be touching the surface of the wood. This can put out the fire even before it burns, so it is important to leave space.

Pro Tips

To make outdoor cooking less frustrating, take note of the tips we’ll share below.

  • If you don’t want to make holes manually using an auger bit, consider using a power drill as an alternative. This will require significantly less effort while assuring the best outcomes.
  • Consider adding a rope on the side of the logs. This will work as a make-shift handle, making it easy to carry your DIY wood rocket stove around the campsite.
  • Keep an aluminum foil handy. This is a versatile material that you can use for outdoor cooking. This will also help to keep your food warm.
  • Be mindful of the recipes. Keep them as simple as possible. Look for foods that you can cook quickly. You won’t have a fully-equipped kitchen, so be creative with what you will cook outdoors.
  • Find the right location where you will be using the wooden rocket stove. Avoid places that are too windy as it can easily put out a fire. Also, avoid locations with dry leaves and other hazards that will make fire spread quickly.

Conclusion

Make cooking a lot easier when you are at the campsite. Consider the things mentioned above on how to make a wooden rocket stove and you can instantly become a pro camper. More than cooking, it can also help to keep you warm while you are camping.

How to Make a Wooden Rocket Stove: Tips and Tricks
5 (100%) 1 vote
About the author

Michael Everett

I am Michael, I like camping and have camped many times over the place. I'm the creator of blog rainycamping.com, through my blog I want to share my camping and travel experiences for people, there are explanations, questions and things you need.

Click here to add a comment

Leave a comment: