With a 3-season or 4-season tent at my disposal, one may think that my camping experiences are always fanciful. Personally, however, it becomes fulfilling not when I stake my shelter near a landscape but when there’s a campfire outside.
Many old-timers may second that thought since the collected flames have various purposes for a person. You can cook with it, chat with family around it, or battle the cold weather thanks to it. The only incident that can dampen anyone’s mood is when you can’t find a dry log after raining.
What will save you now is learning how to start a fire with wet wood. I have two non-tricky methods for you in this blog, so make sure you’ll linger until the last part.
What You Need
You can find raw materials in various degrees of wetness in the wild. To make the task of starting a fire easy, however, try not to go for pieces that still float in water.
It is a sharp tool that people utilize to split small chunks of wood. In case you forgot to bring one, you may just use the ordinary kitchen knife to remove the damp layers.
There are many devices that will allow you to ignite the dry wooden products into flames. Should you not want to carry a fire steel, then a box of matches will do.
What You’ll Do
One advice on how to start a fire with wet wood is to keep things simple. You only need three items for this procedure, but skills are important as well to make the following steps work.
Step 1: Gather the woods.
Find as many branches as you can. They may be lying on the ground or still attached to a dead tree. As mentioned earlier, a piece should not be super wet so that you can have the fire blazing immediately.
Step 2: Shave every damp log.
Now, wield out your hatchet or knife to begin scraping off the water-soaked layer of woods. The thick lumbers ideally have a dry core, and you can just reach it after shaving the outer covering.
Step 3: Ignite the fire or make fuzz sticks.
You should be able to light the raw materials at this point. But if you don’t wish to look for twigs to start it with, you may chisel woods into fuzz sticks. The latter basically requires leaving the shaved bits connected to the logs, so they will catch flames fast.
Watch this detailed explanation on how to do it:
What You Need
It is the smallest wooden bit out there. Tinder may be the driest raw product in such a situation. They can help you put the large pieces into flames.
Branches or Twigs
The other term for them is kindling. These are most likely attached to dead trees still but are not difficult to break off. If ever the dry ones are not available, you can split the logs to obtain multiple kindlings.
They are chunks of wood that can continue burning through the night. Looking for many barren pieces may be stressful, so feel free to carve them out of the massive materials too.
This fire-starting product is the easiest to find anywhere. In case you are quite experienced outdoors, however, you can also take a magnesium igniter or a fire-steel.
Petroleum Jelly and Cotton Balls (Option 1)
Petroleum jelly does not only soothe chapped skin during the cold season. It is a flammable alternative too that you may use in place of tinder. The choice is yours on which brand you will purchase the item from.
Meanwhile, the petroleum jelly needs a cotton ball as a medium to keep the fire burning. Just a few of the latter are necessary, and they may already be in your medicine kit.
Steel Wool (Option 2)
Another candidate is steel wool – the same tool you utilize to scrub the metal cookware clean. The fine ones are especially combustible.
Non-glossy Papers (Option 3)
Papers are the final items that will allow you to start the flames. It seems necessary to specify that they should be non-glossy because you’ll wait forever for magazines to ignite. You should bring old periodicals or scraps in their place instead.
What You’ll Do
The list of essential products may be lengthy, yet learning how to start a fire with wet wood remains effortless. There are just optional materials near the end, in the event that tiny twigs are amiss. By all means, check out the process below.
Step 1: Create a fire bed.
When the woods are damp, chances are, the ground is also wet. That can limit the possibility of feeling warmth early; thus, you should pile logs to form a bed for the flames. If you don’t have enough raw materials, you can make do with large rocks as well.
Step 2: Start building the fire.
Place the tinder on top of the bed and ignite them with your fire-starter of choice. If you run out of twigs and the flames are far from staying alive, produce it with the above options.
The one that requires the least amount of help from you is the combination of cotton balls and petroleum jelly. Despite that, the non-glossy papers and the fine steel wool will work too.
Step 3: Add the kindling after that.
Once there already is a small fire on the bed, you must be quick in adding the branches atop the heap. Remember, though, that the dry branches should always be beside your work area. This way, once the flames are ready, you won’t need to scramble to search for them.
Step 4: Improve the fire with logs.
The burning woods can still go out when the wind blows, so it’s vital to build up your fire swiftly. Whether your goal is to decrease the coldness or to cook, just add a log or two at a time. The last thing you want is an inferno that putting all the woods into the pit at once can create.
Have These Methods Enlightened You On How To Start A Fire With Wet Wood?
You see, the proper techniques on how to start a fire with wet wood exist. The case just seems to be impossible because you need to work with damp materials. However, there are still ways to transform them into dry resources, and I aimed to show you those above.
Did either procedure help you build flames using wet wood? Let me know how you feel about the experience. Cheers!